ネコ・サル用脳定位固定装置 MODEL 1404

HEAVY-DUTY RESEARCH MODEL STEREOTAXIC FOR CATS AND MONKEYS MODEL 1404

Model 1404 Stereotaxic Instrument is a general purpose, heavy-duty research instrument. Its superior rigidity, large frame bars and precision bearing surfaces assure absolute alignment of laboratory animals for indefinite periods of time. By changing adaptors, this modular unit can be used for a wide variety of animals, from small primates and cats down to and including mice, with the same ease and precision.

The Model 1404 consists of a Kopf Model 1430 Frame Assembly and four three dimensional electrode manipulators. Frame bars (18.7mm square) are 30.50 cm long with 100 mm of calibration on either side of zero (ear bar center). Distance between frame bar center lines is17.78 cm. Distance from ear bar center line (A-P zero) to the posterior portion of the cross bar is 12.70 cm.

Model 1404 includes the followings:

  • Model 1430
    Stereotaxic Frame Assembly (1210+1225+1245+”U” Frame) – 1
  • Model 1210
    3-1/2″ x 3-1/2″ Base Plate – 1
  • Model 1225
    Universal Swivel Stand – 1
    “U” Frame with one set of ear bar blocks – 1
  • Model 1245
    Cat-Monkey Adaptor including 1 set of Model 851 Standard Solid Ear Bars – 1
  • Model 1460
    Electrode Manipulators – 4
  • Model 1770
    Standard Electrode Holders – 4

OPTIONAL ACCESSORIES

Model 1211 16″ Base Plate

dki1211

This portable mounting plate is constructed of heavy 3/8″ aluminum. It is 12″ x 16″ and has a clamp screw and mounting socket with a 3/4″ diameter hole for the streotaxic instrument.

Weight: 8lbs.

Model 1711 Intracellular Base Plate

dki1711
The intracellular base plate is supplied with the Model 1730 Intracellular Frame, but can be used to mount any stereotaxic frame. This heavy alumi num base plate is 1-1/2″ x 12″ x 22″ with four rubber feet for dampening vibration. There is a 1″ hole for mounting the stereotaxic instrument at one
end of the plate, and two 3/8-24 threaded holes at the other end of the plate for mounting the Model 1735 Vertical Post & Tie Bar for stability. You can mount the Model 1430 or 1530 Stereotaxic Frame to this base by ordering the Model 1712-02 Sleeve to reduce the mounting hole to 3/4″ diameter, or by ordering the Model 1725 Universal Clamp and Stand Post.

Model 1712 Instrument Mounting Plate

dki1712
Designed for micro-electrode work where high inertia and maximum rigidity are essential, the Model 1712 base plate is 2-1/4″ x 12″ x 36″ aliminum with a 1″ diameter hole and T handle lock (for Model 1730) for mounting the stereotaxic instrument. You can mount the Model 1430 or 1530 Stereotaxic Frame to this base by ordering the Model 1712-02 Sleeve to reduce the mounting hole to 3/4″ diameter, or by ordering the Model 1725 Universal Clamp and Stand Post. Rubber mounts are provided on the corners for dampening vibration.

Model 1449 Electrode Manipulator Stand

dki1449
provides a convenient place to store manipulators after electrodes have been set, before stereotaxic placement. They also make a safe place for storage when manipulators are not in use. Units consist of a 10″long square aluminum bar fitted to a 5″ x 10″ aluminum base plate.

Model 1449 is for use with 1400 and 1500 Series Stereotaxic Instrument (18.70mm bar).

Model 1450 Calibrated A-P Zeroing Bar

dki1450
allows electrodes to be set while the animal is in the stereotaxic instrument. It consists of an A-P bar with 100mm of calibration on each side of zero mounted on an aluminum base plate. Also mounted to the base plate is a locating pin which coincides to A-P, lateral and vertical zero on the stereotaxic frame. By setting electrodes to the point of the pin (ear bar zero) with a manipulator and establishing coordinates, dimensions may be accurately transferred to the calibrated A-P bar of the stereotaxic instrument.

Model 1450 is for use with 1400 and 1500 Series.

The Model 1455 Electrode Angle Calibrato

dki1455proves a quick and reliable method for the accurate stereotaxic placement of electrodes at any angle including right and compound angles.
Adapted exclusively for use with the 900 Series Stereotaxics, this unithas a lateral slide and rotating vertical post mounted on a zeroing point.
The lateral slide has a 0.1mm vernier attached to a moveable slide block.
When the block is set at zero, the zeroing point of the slide is at ear bar zero.

Model 1455 is for use with 1400 and 1500 Series Stereotaxic Instrument (18.70mm bar size).

 ELECTRODE HOLDERS & CLAMPING DEVICES

dkielec

  • Model 1766-AP Cannula Holder was specifically designed to hold a wide variety of Alzet and Plastic One cannula.  
  • Model 1768 Micrometer Adjustable Electrode Holder allows micrometer axial control of the electrode. It holds electrodes from .75mm to 1.5mm. Micrometer extending 5.5cm. Weight: 153g
  • Model 1769 90°Electrode Holder utilizes the same standard electrode holder with corner clamp as the Model 1770, but is mounted so that the electrode protrudes 90°.Holds electrodes from 0.4mm to 3.8mm. Size:15cmLx7.9mm rod diameter. Weight: 76.5g
  • Model 1770 Standard Electrode Holder with Corner Clamp is provided with each electrode manipulator unless otherwise specified It holds electrodes from 0.4mm to 1.3mm.
    Size: 16.5cmL x 7.9mm rod diameter
  • Model 1771 Electrode Holder with Straight Clamp holds electrodes from 0.4mm to 3.8mm.
    Size: 16.5cmL x 7.9mm rod diameter
  • Model 1772 Universal Holder places syringes, large diameter electrodes, electrode holder or drill handpieces stereotaxically. It holds devices from 7.4mm to 12mm in diameter. The Model 1772 consists of a mounting bracket and shaft with a vertical “V” shaped recess and an adjustable open-side clamp.
    Size: 11.8cmL x 7.9mm rod diameter
  • Model 1772-F Universal Holder with Needle Support Foot is primary our Model 1772 Universal Holder with additional attachment for supporting the needle.
  • Model 1773 Electrode Holder with Removable Open-Side Clamp is used for chronic work when cementing electrodes in place.
    Size: 16.5cmL x 7.9mm rod diameter
  • Model 1774 Wedge Holder with Removable Flag is used for cementing electrodes to a plastic flag that is held with a tapered clamp. Because of its design, a great number of electrodes can be placed very closely together.
    Size: 16.5cmL x 7.9mm rod diameter
  • Model 1775 Collet Electrode Holder with insulated collet, holds from 0 to 1.1mm diameter electrodes.
    Size: 15.7cmL x 7.9mm rod diameter
  • Model 1776 Electrode Holder has a stainless steel end with a set screw. Hole sizes from 1.5mm to 6mm are available. Please specify size required.
  • Model 1777 Razor Blade Holder will hold a standard razor blade.
    Size: 15cmL x 7.9mm rod diameter
  • Model 1778  Electrode Holder is a longer version of the Model 1770 with an 8″ shaft and is supplied with Models 1460-61 and 1760-61 Electrode Manipulators.
    Size: 20.4cmL x 7.9mm rod diameter  Weight: 100g