KD Scientific presents its newest generation of advanced microprocessor-controlled syringe pumps designed especially for low, pulse-free flow rates.
New Optional Keypad Programmable Capability
Now you can program any KDS200 Series pump in just minutes to perform virtually any laboratory application. Also new: Two push-pull syringe pumps — plus an optional built-in audible alarm and other convenient accessories to help facilitate your research. Our selection of pumps range from inexpensive single syringe infusion pumps to multi-syringe infusion/withdrawal pumps featuring independent rate and volume settings for both infusion and withdrawal plus five different mode selection.
All KD Scientific syringe pumps have a menu and alphanumeric display to quickly prompt you through set up. All pumps feature preset rate and volume control plus automatic shutoff. Dispense volume is tracked and displayed continuously. When the preset volume has been dispensed, the pump shuts off automatically. Each KD Scientific pump employs a sophisticated microstepping motor drive to virtually eliminate pulsing. Built-in TTL and RS-232C interfaces permit easy external control.
This feature-laden two-syringe infusion pump combines a broad speed range and holds a wide range of syringe sizes to meet the requirements of virtually any laboratory application.
Features
- Holds two syringes, 10 ul to 140 ml each
- Backlit LCD display
- Knob locks/unlocks drive block for effortless, drag-free adjustment
- Simple menu-driven setup:
– Syringe diameter(selected from displayed table)
– Dispense volume
– Dispense flow rate - Continuous dispense volume display
- Preset volume control and automatic shut-off
- Settings can be reviewed or changed during operation
- Optical encoder stall detection
- Choice of unit selection
- Last settings stored in permanent memory
- Built-in RS-232C interface for computer “daisy chaining” up to 100 pumps
- TTL interface for foot switch, timer, relay control; outputs for run indicator, valve control
- Optional keypad programmable feature(KDS200P)
Dimensions: 28W x 23D x 14cmH
Weight: 4kg
KDS 210 Infusion/Withdrawal Pump
The KDS210 offers you more advanced features than any other infusion/withdrawal pump in its price range — including five operating modes plus independent rate and volume settings for both infusion and withdrawal.
Features:
- All features of KDS200
- Independent rate and volume settings for infusion and withdrawal
- Multiple mode selection:
– Infusion
– Withdrawal
– Infusion then withdrawal
– Withdrawal then infusion
– Continuous cycle - Optional keypad programmable feature(KDS210P)
Dimensions: 28W x 23D x 14cmH
Weight: 4kg
KDS 220 Multi-Syringe Infusion Pump
Ideal for applications requiring multiple syringes, the KDS220 is adaptation of the KDS200. It has been modified to hold up to 10 syringes.
Features:
- KDS220 has all features of KDS200
- Multiple syringe holder:
– Up to ten syringes, 10 ul – 10 ml each
– Up to six syringes, 20 ml – 60 ml each
– Up to four syringes, 100 ml – 140 ml each - Optional keypad programmable feature(KDS220P)
Dimensions: 28W x 30D x 14cmH
Weight: 4.3kg
KDS 230 Multi-Syringe Infusion/Withdrawal Pump
Ideal for applications requiring multiple syringes, the KDS230 is adaptation of the KDS210. It has been modified to hold up to 10 syringes.
Features:
- KDS230 has all features of KDS210
- Multiple syringe holder:
– Up to ten syringes, 10 ul – 10 ml each
– Up to six syringes, 20 ml – 60 ml each
– Up to four syringes, 100 ml – 140 ml each - Optional keypad programmable feature(KDS230P)
Dimensions: 28W x 30D x 14cmH
Weight: 4.3kg
KDS 250 Four- Syringe Microdialysis Infusion Pump
Features:
- All features of KDS 200
- Multiple syringe holder:
– Four syringes, 10 ul to 10 ml each
– Separate clamping accommodates different sizes
– Syringes may be positioned independently for sequential dispensing - Optional keypad programmable feature(KDS250P)
Dimensions: 28W x 23D x 15cmH
Weight: 4kg
KDS 230 Multi-Syringe Infusion/Withdrawal Pump
This pump provide simultaneous infusion and withdrawal with opposing syringes on a single drive. The KDS260 is adaptation of the KDS210. Two syringes infuses, the others two syringes withdraws at the same rate.
Features:
- All features of KDS210
- Holds up to four syringes, 10 ul to 60 ml each for push-pull, or two syringes for one direction only
- Optional keypad programmable feature(KDS260P)
Dimensions: 28W x 23D x 14cmH
Weight: 4.3kg
New! Keypad programmable option now available with all KDS200 Series syringe pumps — lets you program right from the keypad.
All you do is follow simple menu-driven prompts.In just minutes you can customize a purogram to: control the pump from seconds to days, change flow rates, pause, ramp rates up or down automatically, control outputs and respond to external TTL signals.
Unlike other programmable pumps, here’s no need to enter time increments or decrements between start and end flow rates.(KDS pumps provide a smooth, linear transition automatically.)
A program is divided into eight variabletime periods called steps. A step can be up to 12 hours long and may be changed without effecting the other steps.
Each step offers these options:
- Time duration, from one second up to 12 hours
- Travel direction_Infuse or withdraw (where available)
- Beginning flow rate (ul/hr to ml/min range)
- End flow rate (ul/hr to ml/min range)
- Pause _ Waits for an external trigger to start
- Status of output TTL pins
- Loop option _ Loops back to any previous step and repeats the intermediate steps.Two separate loops available.
- Set the count in the loop cycle. Steps may be repeated up to 100 times.
- program stored permanently in memory.
Specifications are subject to change without notice.